What Is a Halo 5 Whole-Home Water Filtration System?
The data is clear on the cleanliness of Cumming’s water. This water that travels into our showerheads, kitchen faucets, water heater, and even ice maker is… contaminated. The only disagreements to be had about that statement is just how contaminated it is. And although filtering water at just your kitchen sink may help with the taste of your drinking water, it still leaves the rest of your fixtures with the municipal water.
Installing a whole-house filtration system handles water quality right where the supply enters your home. At Rx Plumbing & Drain, the Halo 5 whole-home water filtration system is just one of many great options that we install and recommendfor homeowners in Cumming, Alpharetta, Suwanee, and Johns Creek.
What Is a Halo Whole-Home Water Filtration System?
A Halo system is a maintenance-free, whole-house water filtration and conditioning unit. It’s connected directly to your main water supply line and, unlike standard filters that only clean water at one faucet, a Halo system processes every drop before it even gets to your pipes.
The Halo 5 system uses 4 distinct stages of premium media to filter out contaminants, followed by a 5th stage that conditions hard water minerals. This multi-stage process removes:
Chlorine
Chloramines
heavy metals
volatile organic compounds (VOCs)
foul odors
Preventing scale accumulation inside pipes and appliances without using salt, chemicals, or manual filter changes gets you bottled-quality water out of every sink, bath, and shower in your house.
How Does the Halo 5 Water System Work?
We can break this Halo 5 water system down to 2 simple steps:
Water starts flowing through 4 layers of special filters which catch and remove unwanted waste.
This system uses a built-in magnetic conditioner to change how hard minerals behave. Instead of sticking to your pipes and shower doors as a crusty scale, those minerals stay dissolved in the water and wash right down the drain, all without using salt or requiring frequent filter changes.
How Does Halo Condition Hard Water Without Salt?
Most traditional water softeners replace hard minerals like calcium and magnesium with sodium, but they usually require:
bulky salt bags
routine refills
backwashing cycles that flush salty wastewater down your drain
Halo 5 takes a different approach by using magnetic conditioning instead of chemical ion exchange. The inline Halo Ion conditioner uses multi-reversing polarity magnetic fields. When water flows through this magnetic field, the dissolved calcium and magnesium ions change their molecular structure.
At the end, those minerals are suspended in the water and wash harmlessly down the drain instead of sticking to pipe walls, heating elements, and glass shower doors. You get the protective benefits of soft water without the slick chemical feel, sodium discharge, or ongoing salt expense.
For a deeper look into protecting your home’s main lines, check out our guide on underground plumbing repairs.
Main Benefits of a Whole-House Filter
Getting a more efficient filtration unit on your main line will definitely have an impact your daily routine and long-term repair bills:
Better drinking water from every tap
Longer appliance life
Healthier skin and hair
Zero maintenance
Pipe protection
If you notice low flow alongside mineral spots, scale buildup might not be your only issue. Read our practical walkthrough on how to locate and clear main line drain clogs to keep your entire drainage network running.
How Is a Halo System Installed?
Installing a Halo whole-home filter requires modifying your main incoming water supply loop. Here’s how our team approaches the installation process:
Locating the Main Shutoff: We need to find the main water service line where it enters your home, usually in the basement, garage, or outdoor utility manifold.
Plumbing the Bypass Valve: We solder copper connections to install a three-valve bypass loop. This allows you to isolate the filter during routine home plumbing service without shutting off water to the entire house.
Mounting and Levelling: The Halo tank is placed on a stable surface near an electrical outlet and a drain connection for the automated regeneration cycle.
System Flush and Testing: We power up the electronic control head, configure the automatic backwash timer, and perform an initial flush to clear air and fine carbon dust before opening flow to the house.
To prevent future backflow issues or pressure drops after adding new equipment, explore our article onwater pressure regulation and main valve maintenance.
Ready to Filter Your Whole Home’s Water?
If you’re concerned about what’s coming through your taps, start with your water. We can look at your home, water supply, and filtration goals before recommending anything.
RX Plumbing & Drain installs Halo whole-home water filtration systems throughout Cumming, Alpharetta, Suwanee, Johns Creek, and North Atlanta. We’ll properly size the system, install it on your main water line, and make sure everything works as intended.
Ready for cleaner water from every tap? Contact RX Plumbing & Drain to schedule a whole-home water filtration consultation.
Frequently Asked Questions About Halo 5 Water Filtration Systems
Does Halo 5 water system require replacement filters?
No, the Halo 5 system uses a self-cleaning automatic backwash system that reverses water flow to scrub the filtration media. The media bed is designed to last up to 10 years without manual filter cartridge replacements.
Will a Halo water filter drop my water pressure?
When properly sized for your household line size (typically 1-inch or 1.25-inch), a Halo system doesn’t cause any noticeable drop in water pressure. To be sure, our plumbers check peak flow rates before selection to match your home's demand.
Is Halo water safe for plants and lawns?
Yes, because Halo conditions water without adding sodium or chemicals, the water remains completely safe and it’s actually beneficial for lawns, gardens, pets, and indoor plants.
